Home page

How to store T-shaped steel?

Release time:

2024-04-26

Stacking method: T-shaped steel should be stacked vertically, and the bottom should be flat and stable. Timbers should be placed between each layer to prevent deformation and damage. At the same time, they should be kept horizontally and vertically flat when stacked to avoid extrusion deformation at the bottom.

T-shaped steel is a common building material. When storing, you need to pay attention to the following points:

1. Storage environment: T-shaped steel should be stored in a dry, ventilated, and non-corrosive gas indoor environment. Avoid direct sunlight and rain to prevent rust.

2. Stacking method: T-shaped steel should be stacked vertically, and the bottom should be flat and stable. Timbers should be placed between each layer to prevent deformation and damage. At the same time, they should be kept horizontally and vertically flat when stacked to avoid extrusion deformation at the bottom.

3. Avoid stress: When stacking T-shaped steel, avoid being squeezed and impacted by other heavy objects to prevent deformation or damage. Especially when stacking for a long time, the stacking position should be regularly checked and adjusted to maintain the flatness of the steel.

4. Prevent moisture: T-shaped steel is prone to moisture and rust, so during storage, the room should be kept dry. Moisture-proof agent or moisture-proof box can be used to absorb moisture to ensure the dryness of the steel surface.

5. Regular inspection: Regularly check whether the stored T-shaped steel is deformed, damaged or rusted, and take timely measures for repair or treatment to maintain the quality and service life of the steel.

In short, the correct storage of T-shaped steel can extend its service life and reduce waste and damage. During storage, attention should be paid to environmental conditions, stacking methods, exposure

Latest News

Advantages and characteristics of steel components

The steel component system has the comprehensive advantages of light weight, factory manufacturing, fast installation, short construction period, good seismic performance, fast investment recovery, and less environmental pollution. Compared with reinforced concrete structures, it is more "tall, large, and light" Due to the unique advantages of development in the three aspects, steel components have been reasonably and widely used in the field of construction engineering around the world, especially in developed countries and regions.

2024-05-07

Bearing capacity of steel components

Practice shows that the greater the force, the greater the deformation of the steel component. However, when the force is too large, the steel components will break or undergo severe and significant plastic deformation, which will affect the normal operation of the engineering structure. In order to ensure that engineering materials and structures work normally under load, each steel component is required to have sufficient load-bearing capacity, also known as load-bearing capacity. The load-bearing capacity is mainly measured by the sufficient strength, stiffness and stability of the steel components.